Home 

Auction $ 
Sy - Index
Grif - Index
A - Z Index
Scrapbook 
Animations 
Slide Show 
  YouTube 
Puzzles
Foundry 
Search 
Links 

 Join    

 Adv    
What's New 
Web Notes 
   Feedback   
 
MBCA
Members
Web
 
A-Z Index  
Date Index 
Conventions 
Scrapbooks   
European Tin 
Videos 
Notes  
 

 


The Tin Scotsman Bank
by Sy Schreckinger – ANTIQUE TOY WORLD Magazine – October, 1997

     Valiant and proud is the image of the Scottish Highlander. In sharp contrast is the figure depicted upon the subject of this month's article. As seen in Figure I, the tartan-clad individual appearing upon the facade of the tin "Scotsman Bank" is represented as a humorous caricature.
     To date, only two different antique mechanical banks utilizing the image of the
clansman are known to exist. One of these is the aforementioned tin "Scotsman Bank," and the other is the cast-iron "Kiltie Bank" seen in Figure II (refer to Antique Toy World, July 1996). The "Kiltie Bank," however, presents a dignified and stoic image of the Highlander.
     Interestingly, the tin "Scotsman Bank" identifies a rather obscure and seldom-discussed aspect of Highlander garb, namely the sporran. This particular accessory is worn around the waist and rests upon the center of the kilt. It is a small, furry or hairy pouch typically made of either badger or goat skin and fastened by a metal clasp.
     Activation of the "Scotsman Bank" is wholly dependent upon the jolly chap's sporran, as is indicated by the verse imprinted upon the face of the bank: "Lift my sporran lightly — On my tongue a penny — If ye do this nightly — Ye'll soon ha'e many." Lifting the Scotsman's sporran results in blinking eyes and protrusion of his tongue, upon which a coin is then positioned. The depositor lightly presses the sporran back into place, whereupon the eyes blink once again and the tongue with coin recedes into the mouth. Monies are recovered by unlocking a key-lock, trap-door-type coin retainer underneath the base.
     There are two variations of the tin "Scotsman Bank." These pertain solely to the lithography on the front of the mechanical. One incorporates the operating instructions verse within the design (Figure I), and the other omits it completely.
     A rare, early 20th-century Saalheimer and Strauss catalog page is seen in Figure III. In it are featured the tin "Scotsman Bank" and several other mechanicals in the company's line. Located in Nurnberg, Germany, the hub of early European tinplate toy production, Saalheimer and Strauss was one of the most important German manufacturers of tin novelty items, children's playthings, household goods, and mechanical banks.
     The unearthing of this catalog page, which occurred approximately 15 years ago, was fortunate since it provided information on several tin German mechanical banks whose manufacturer had heretofore been an enigma. This discovery and subsequent research efforts identified the "SS" logo (to the right side of the Scotsman's walking stick) as that of the Saalheimer and Strauss Company.
     To date, no patent papers have been located relating to either the design or workings of the "Scotsman Bank." However, a similar bank in the "SS" line had received Deutsches - Patent Number L-698681 on June 29, 1928 (see Figure III, top row, center). It is presently assumed that, due to the great similarities between the configuration and action of both the tin "Minstrel Bank" and the tin "Scotsman Bank," each was protected under the same patent.
     Unfortunately, the popularity of German tin mechanical banks has waned over the past few years. Yet I am confident that renewed appreciation of their design, form, action, and scarcity will help them to regain their rightful place in mechanical bank collections.
     The following dimensions are provided as an aid to collectors in determining size and scale of the "Scotsman Bank": 6-7/8 inches in height, and 2-7/8 inches in width.
     Acknowledgment: The superb example of the tin "Scotsman Bank" (Figure I) is from the collection of Steve and Marilyn Steckbeck.
     Correction and addendum: Refer to Antique Toy World, June 1997: "THE FREEDMAN'S BUREAU." Fellow collector William Werbell has been kind enough to send me a copy of an original label affixed to his example of this mechanical bank. The label identifies the bank as "THE FREEDMEN'S BUREAU," thereby correcting my spelling. In addition, the label identifies the manufacturer of the bank. It reads: "FREEDMEN'S BUREAU, MANUFACTURED BY F.L. CHILDS CO., SPRINGFIELD, MASS. PATENT AFPLIED FOR."

 [ Top] [ Back ]